Parts & Accessories
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
For some serious protection in the cold and wet for your toes, slip on a pair of the Neoprene Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Rear opening with zippers securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion resistant toe and heel sole utilizes universal welted velcro closure, so these covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene
A little cold or windy weather in the forecast? No problem. When full shoe covers are overkill, pull on our Neoprene Toe Covers for just the right amount of warmth and protection. Perfect for short winter rides or longer shoulder season excursions, the stretchy, weather-resistant design is compatible with all cleat types. Abrasion-resistant panels add durability, so feet stay comfortable ride after ride. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
Windy descent. Sudden downpour. Cold, high-elevation climb. Whatever the ride throws your way, our Neoprene Tall Shoe Covers keep feet comfortably pedaling onward. Stretchy high-cut neoprene and fully taped seams keep feet dry and protected in wet and windy conditions. Gravel or road ride, the universal cleat opening accommodates your preferred shoe type. For added durability, abrasion-resistant panels are strategically placed in high-wear areas to ensure these overshoes hold up year after year. - Fully taped seams prevent water intrusion to keep you dry and protected in wet conditions. - Zipperless construction for a comfortable fit around your ankles. - Abrasion-resistant toe and heel sole with universal welted hook-and-loop closure, so covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester
BOA® L6 REPAIR KIT 1 DIAL COMPATIBLE WITH SH-RC701/XC701/ME501/MW701
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back Velcro width adjustment
- Three EVA interchangeable levels of support for arch and metatarsal offer complete customization - EVA base material with TPU vibration dampening material in the forefoot area for proper support and cushioning - Co-molded heel support zone is optimized to help stabilize the foot during pedaling - Articulating arch support area is designed for compatibility with ExoWrap technology - TransTextura Plus layer transfers moisture and helps fight bacteria and odors
Ideal for the cold season: Extremely lightweight GORE WINDSTOPPER overshoes keep your feet wonderfully warm. They fit snugly on shoes for a close fit. A zipper on the back makes for easy off and on. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Reflective logo and piping - Zipper closure
Replacement 2Density insoles Fits all Giant & Liv non-MES road and mountain shoes - Giant Phase - Liv Mova - Giant Transmit - Giant Phase 2 - Liv Regalo - Giant Flux - Liv Fera
Born out of necessity during wet and muddy Midwest gravel races, our Gravel Gaiter keeps mud, sand and gravel out of your shoes. We took inspiration from the scree gaiters used by trail runners to develop a cycling-specific version that provides maximum breathability and durability so you can ride through the worst conditions. A locking zipper keeps the Gravel Gaiter securely in place and the Hypalon midfoot strap won't get in the way during treacherous hike-a-bike sections.
Whether you’re preparing to hit the road or trail, the AmFIB® Lite shoe cover is the right choice to keep your feet warm and dry. The three-layer softshell fabric blocks the wind and sheds moisture while remaining highly breathable. A high cuff designed to overlap with tights ensures a comfortable seal, and BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Compatible with road and mountain bike shoes - Three-layer softshell fabric is windproof and water-resistant - Zippered closure for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 43% polyamide, 29% polyester, 28% polyurethane
- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo
For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
Wore out the laces on your S-Works Sub6 shoes? Don't fret, Specialized has your replacement laces right here. Now lace 'em up and get riding. - 110cm: Shoe Size 36-41 - 120cm: Shoe Size 41.5-43 - 130cm: Shoe Size 43.5-45 - 140cm: Shoe Size 45.5-49
$15.00 - $17.00
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
If you lost or damaged the Warp Sleeve on S-Works Sub6 road shoes, you have no reason to fear—Specialized has the replacement. Pick up a pair and start saving those seconds again.
Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
Page 1 of 2 Next page