No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. The Kinetic Traxle comes in 3 thread pitches: - T-2101 Coarse: M12 x 1.75mm - T-2102 Medium: M12 x 1.5 - T-2100 Fine: M12 x 1.00mm (Fine XL has the same thread pitch and is a longer version of the fine Traxle)
Keep corrosive sweat from reaching your frame while you're generating heat on your trainer. - Cell phone pouch included
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our absorbent Sweat Guard is designed to keep your carbon, aluminum and steel frame and components safe from corrosive sweat while mimicking your favorite spin class at home. And because your cycling training plan asks for incredibly intense efforts, the Sweat Guard ensures not a drop of sweat will hit your frame during leg-busting intervals. Add a Floor Mat to your indoor cycling collection and you’ve got a training party! - Ultra absorbent terry cloth material - Protects carbon, aluminum, and steel frames and components - Adjustable to fit most any bike - Simple setup and removal with Velcro handlebar mounts and elastic seatpost strap - Machine washable, cold
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Love training when you travel? Need an awesome warm-up and cool-down during weekends at the races? Want to crush that indoor bike trainer workout in a small living space? Meet the Omnium Over-Drive Portable Bike Trainer. The adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any stationary bike trainer available. Plus the precision rollers and internal progressive resistance design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides it in its padded tote like it was never there. Add a Sweat Guard and Trainer Mat and you’re armed with the complete training package. - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer - Patented, Internal Progressive Resistance via friction-less Eddy Current - Parabolic, progressive resistance curve accurately simulates outdoor cycling (rolling + wind resistance) - Adaptable fork-mount and adjustable sled design (16”-29” wheel; Thru-Axle and QR compatible) - Lightweight design for a complete bike trainer system – 14lb (6.35kg) - Precision machined 4” aluminum rollers create a smooth and quiet ride - Included fork adapters: - 9mm Quick-Release - Thru Axle: 12×100mm, 15×100mm & 15×110mm - Available fork adapters: - Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike) - Adaptable to virtually any bike size and geometry (up to 1348mm wheelbase with optional extender) - Maintenance-free resistance unit and roller bearings - Includes heavy-duty tote bag for easy transport and storage - Compatible with cycling apps: Zwift, The Sufferfest, TrainerRoad and Kinomap traditional trainer features* - Patent number: 9,393,475 *Requires ANT+ or BT rear wheel speed sensor
The Rock and Roll Control is the only interactive, app-controlled electronic trainer that allows your bike to move with you for a more realistic road feel AND a stronger core. It's part of our newest generation of interactive, app-controlled trainers offering the best power training workouts available, and features ANT+ FE-C and Bluetooth FTMS compatibility along with a more accurate and responsive ride. The Rock and Roll Control features a massive 12lb flywheel for the most inertia of any trainer in the category. It delivers efficient, app-controlled electronic resistance to automatically change with the course or workout, and is compatible with apps like Kinetic Fit, Zwift, TrainerRoad, Rouvy, Kinomap, The Sufferfest, and FulGaz. Additional features include super-quiet operation, accurate and reproducible power data, reliable wireless connection, incredible bike compatibility, and the cycling industry’s best warranty. - Patented frame mimics real-road movement - Controlled resistance to simulate terrain changes in workouts and on virtual courses - Pairs with devices using Bluetooth Smart and ANT+ - Works with Kinetic Fit, Zwift, and TrainerRoad on Bluetooth-connected smartphones, tablets, and laptops - Includes a free 6-month subscription for the Kinetic Fit power-training app - Compatible with virtually all bikes (bikes with a rear thru-axle require a Kinetic Traxle thru-axle adapter, sold separately) - Includes skewer - Max slope: 10% - Max resistance: 1800 watts at 30mph - ±3% accuracy - Frame fits 22-inch to 29-inch wheels - Ergonomic rubberized knobs and feet - Unconditional lifetime warranty on frame, one-year warranty on electronics
JFK once said, “Nothing compares to the pleasure of riding a bike.” Here at Saris, we couldn’t agree more. That’s why we’re committed to helping bicyclists of all types get on their bikes and ride. The Fluid bike trainer can help you do just that, no matter the season, schedule or time of day. Its fluid progressive resistance matches your effort without hardly making a sound, no adjustments needed. Plus, the Fluid comes with a durable, foldable, and easy-to-store trainer frame. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Comes on an easy-to-store, foldable bike trainer frame - Compatible with Zwift and other indoor training apps
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
This is the new small wheel adapter for use on newer Kinetic trainer models. A must for BMX, recumbents, and any bike with tires having an outside diameter of 22-inches or less. The small wheel adapter raises the level of the resistance unit of any of the Kinetic Trainers by up to three inches. In doing so, the trainer will fit tires with outside diameters as small as 16-inches. By using this adapter, Kinetic trainers accommodate most BMX, kids', and recumbent bikes. - Compatible with T-2xxx two-thousand series and T-6xxx six-thousand series trainers - Not compatible with 24-inch bicycles
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps
The Kinetic Control Power Unit installs in minutes and is the most affordable and convenient option for upgrading any Kinetic Rock and Roll or Road Machine trainer frame to our most advanced, interactive, app-controlled power training experience. It's part of our newest generation of interactive, app-controlled trainers offering the best power training workouts available, and features ANT+ FE-C and Bluetooth FTMS compatibility along with a more accurate and responsive ride. A massive 12-pound flywheel provides a realistic road feel with interactive, automatically-controlled resistance, super-quiet operation, and accurate and reproducible data. It works with apps like Kinetic Fit, Zwift, TrainerRoad, Rouvy, Kinomap, The Sufferfest, FulGaz and more. - Includes a free 6-month subscription for the Kinetic Fit power-training app - Works with Kinetic Fit, Zwift, and TrainerRoad on Bluetooth-connected smartphones, tablets, and laptops - Controlled resistance to simulate terrain changes in workouts and on virtual courses - Pairs with devices using Bluetooth Smart - Max slope: 10% - Max resistance: 1800 watts at 30mph - ±3% accuracy - Retrofits older Kinetic trainer frames - Easy to assemble - Unconditional one-year warranty on Power Unit
- Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped
Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.
700x23c Trainer Tire is specifically designed for use on trainers for ultra quiet, smooth rolling durability.
Connect your PC to CycleOps VirtualTraining.
Don't miss out on any action! The Tacx GoPro bike mount can be placed on the handlebar or saddle to record everything that happens in front or behind you. Installing the bracket on your bike is very simple. After placing the mount on your bike, you can insert the camera into the holder easily and quickly and you are ready to record. - Easily switch between mounting options - Handlebar adapter can be used on road or mountain bikes - Saddle adapter works with 7mm and 9mm diameter saddle rails and is also compatible with the Tacx Mudguard - Compatible with GoPro HERO and HERO +, GoPro HERO 2, GoPro HERO 3 and 3+ and GoPro HERO 4 and 4+ models - Also suitable for any other camera with a base identical to that of GoPro cameras
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Page 1 of 2 Next page