Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Problem Solvers Locking Headset Spacer
$10.99
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
Problem Solvers Handlebar Clamp Shim
$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Problem Solvers ReMatch Adapter 1.1
$31.99 - $54.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
Problem Solvers Cable Doubler
$79.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
SRAM PowerLock Eagle Chain Connector 12-Speed
$19.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
SRAM PowerLock Link Chain Connector
$4.99 - $5.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM Power Link Chain Connector
$3.99 - $17.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
Surly Stainless Seatpost Clamp
$20.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.
Zipp Vuka Clip Aerobar with Vuka Alumina Extensions
$140.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. Features - Fit, security, and adjustability - Above-bar or below-bar mounting system - Compatible with most extensions
Zipp Vuka Clip Riser Kit
$25.00
Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. - Sold in pairs - Risers cannot be stacked - Includes hardware
Sunlite Chromoly Quill Stem Extender
$15.99 - $17.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$6.25
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Shimano Dura-Ace R9150 Di2 Front Derailleur Braze-on Adaptor
$17.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Specialized City Bike Kickstand
$20.00
2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount
Surly MDS Dropout Chips
$33.50 - $50.00
The 12mm slotted MDS dropout is the newest chip for Surly's MDS equipped trail frames. You like chips, don't you? The 12mm slotted dropout chip uses a standard derailleur mount for maximum compatibility and is made of cast and machined 6061-T6 aluminum, with a fender eyelet. What's the coolest part about the 12mm slotted MDS chip, you ask? The fact that it also has the capability to run a 12 x 142mm thru-axle in a single speed configuration. This is good news because single speeds are good news. When you get an MDS equipped frame you're getting the option to set it up however you want. You can run a 142 x 12mm thru-axle rear end with a direct mount Shimano hanger, standard 135mm QR or The Mighty Singlespeed. The way this will work is that Surly complete bikes that feature the MDS will ship with whatever chip is compatible with derailleur spec. For instance, the complete Instigator 2.0 ships with the 142 x 12mm thru-axle Shimano chip. If you want to change it to a singlespeed later (and why wouldn't you?), all you have to do is get the SS chip. Frames will ship with all three MDS chips so pick your poison. The 142 x 12mm and 135mm QR chips are made of cast and machined 6061-T6 aluminum and The Mighty Singlespeed chip is 304 stainless steel, because the two words 'aluminum' and 'singlespeed' should never be too close to each other. Bad things can happen…. As you can see, the MDS gives you not just different build options, it lets you use a more varied selection of parts for your frame up builds. The MDS is featured on most of our trail bikes. That's right: Krampus Ops, Karate Monkey Ops, Instigator 2.0 and Ice Cream Truck frames all sport these puppies.
Problem Solvers Brake Boss Plugs
$4.99 - $6.50
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
Sunlite Cantilever Shoe Eye Bolt
$5.00
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
Salsa Derailleur Hanger For Beargrease Carbon
$20.00
Salsa Derailleur Hanger For Beargrease Carbon
Wheels Manufacturing Inc. Derailleur Hanger 17
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-17 measures 15.49mm between the 2 mounting holes (center to center) and 4.7mm between the 2 vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 16
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 284
$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with Specialized SCS 135x12 thru-axle system. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
Wheels Manufacturing Inc. Derailleur Hanger 9
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Dimension Seatpost Clamp
$17.99
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
Manitou Milo Integrated Lock Out Kit
$70.00
- Retrofits all Absolute damping forks (sold by fork year/model) - Separate thumb-operated lock and release buttons - Die-cast alloy body with forged alloy lever
Problem Solvers 1-1/8-inch Headset Spacers
$3.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
RockShox XLoc Sprint Remote
$124.00 - $137.00
This hydraulic lockout offers completely sealed and dependable suspension fork or rear shock lockout control through the click of an easy-to-reach button that can be triggered with a single thumb press. Press on to lock, press again to unlock. It’s just that easy. - Includes Hose, Banjo, Cover Part
Vision Armrest Pads
$19.99
- Deluxe molded replacement pads fit all armrest Vision aero bars - Molded replacement pads fit the Vision Mini TT clip-ons - Dual density foam for maximum comfort - Non-slip textured top
Profile Design 35c Carbon Extensions
$166.99
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35c is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35c is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 262g/pair
Page 1 of 20 Next page