Cables

• Fits cantilever brakes • Sold individually

- Complete cable kits for internal three speed hubs

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.

Jagwire's Road Pro Complete Cable Kit is the perfect way to upgrade your shifting and braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM shift and brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved performance. Plus, with all the small parts included in the kit it's easy to install.

Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

-Wheels Mfg rubber donuts fit over your brake and shift cables preventing exposed cables from contacting frame and reducing cable slap noises

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Jagwire's Inline Index/Detent Adjusters are installed by cutting the front sections of shift housing and inserting them between the two housing pieces to join them again. Once in place, the Inline Adjusters let you fine-tune the shift cable tension by hand, and even while riding, to dial-in your front and rear shifting. You simply turn the knurled center barrels on the adjusters by hand to tighten or loosen the cable tension.

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables. - 5mm ID for use with most braking cables. - 50-count bottle

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Shifting cables for Road/Mountain bikes.

Jagwire Mountain Pro Hydraulic hose is the perfect way to customize your bike while enhancing braking performance and durability. Simply select the Mountain Pro hose color you want and match it with a Quick-Fit kit (sold separately) for your brake system.

• Galvanized steel inner wire • Standard 5mm brake housing • Front or Rear

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

- Precision-machined cable ferrules for improved braking and shifting performance. - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 50-count bottle

Jagwire's Universal Pro Non-Crimps are a custom finishing touch for the ends of your brake and shift cables and prevent them from fraying so the cables keep functioning. Also, because they're not crimped in place and go on/off without tools, you can easily remove them for holding the ends of the cables to make adjustments. Best of all, the Non-Crimps are made of soft, safe rubber and they come in colors so you can add some more style to your ride.

Jagwire's Hooded Shift End Caps fit over the ends of your shift cable housing sections to protect them and keep the cables and shifting operating smoothly. These quality aluminum cable housing ferrules are "hooded" (the little tip on the end) to help prevent dirt and moisture from getting inside the cable housing. You get a bottle of 30.

Jagwire's Cable Guide Stoppers are rubber adapters that fit over hydraulic brake lines so that the lines will fit into various open-type frame cable-housing stops and stay securely in place. You get a pack of 50.

Jagwire's Straddle Cables With Adjusters are for use on TRP Eurox and Paul Component Engineering cantilever brakes (brakes sold separately). The adjusters fit onto one brake arm and allow you to turn the rubber-coated ends of the adjusters to fine-tune your brake adjustment by tightening/loosening the Straddle Cables (included but not shown in the photo). You get 2 Straddle Cables and 2 Adjusters.

• MTB or Road • 1.5 x 2667mm • Galvanized

• MTB or Road • 1.5 x 1855mm • Galvanized

• For mountain bike cable-actuated brakes • 1.5mm x 3000mm • Stainless steel