Skip to main content

Filter By:

Fenders

$50.00
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm
$44.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
$4.99 - $5.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$64.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$54.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
$18.00 - $20.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$16.99
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame
$11.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible
$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible
$37.99
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible
$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
$19.00
- Unique softer PP material helps prevent cracks in extreme temperatures - UV resistance for increased durability. - Proprietary bracket design helps keep fender stable on the bike - Front model fits most down-tubes - Rear model offers adjustable angle
$50.00
- Designed for compatibility with the Giant Defy Aluxx and Liv Avail Aluxx bikes - Quickly adjust gap between fender and tire - Tool-Free universal mounting system - Full coverage protection
$57.75
- Safety release clips detach passively when an object becomes lodged - Length-adjustable struts and strut slots for perfect positioning and tire clearance - Designed for use on disc brake bikes with thru-axles - Compatible Giant Bike Model: Defy / Defy Adv/ Avail Adv / Contend AR/ Contend SL - Compatible Wheel Size: 38 version: 700*32c (Tire width: <320mm), 45 version: 700*32c~700*42c (Tire width: 320mm~420mm)
$57.75
- Safety release clips detach passively when an object becomes lodged - Length-adjustable struts and strut slots for perfect positioning and tire clearance - Designed for use on disc brake bikes with thru-axles - Compatible Giant Bike Model: Defy / Defy Adv/ Avail Adv / Contend AR/ Contend SL - Compatible Wheel Size: 38 version: 700*32c (Tire width: <320mm), 45 version: 700*32c~700*42c (Tire width: 320mm~420mm)
$56.00
Giant's Speedshield Tour fenders are a simple, lightweight way to fend off muck and grime. All-weather polycarbonate construction offers years of reliable service, and the adjustable stainless steel hardware is stable and easy to install.
$225.00
Catrike Front Fender, please select the version you need. If you have a Catrike Dumont or Road-ar, please select suspension version.
$250.00
Catrike Front Fender, please select the version you need. If you have a Catrike Dumont or Road-ar, please select suspension version.
Page 1 of 1