Tools

Everybody needs a good knife in their backpack or tool kit. Here's a favorite of the All-City team, made by the fine folks at CRKT. It's got a clip on one side, the AC logo on the other, and is good for spreading delicious jams, making dangerous arm movements, and of course, cutting things. - Open length: 6.5-inches - Closed length: 3.75-inches - Blade length: 2.625-inches - Weight: 3.1-ounces - Blade material: Stainless Steel - Edge type: fine - Handle material: steel - Knife type: locking folder

Keep your tools at hand to avoid the walk of shame. - 11 Bits included - Hex: 2, 5, 3, 4, 5, 6 - Torx: T10, T15, T20, T25, T27, T30 - Quiver holds 3 bits - Magnetic bit receptacle - JIS driver - Threaded barbs for a secure fit in bar tape and allow for a tool-free removal - Fits standard road bars - Tin box included - Weight: 75 grams (Tool bit holder, Quiver, and 3 Bits)

Brake pad spreader tool for Avid Elixir brakes.

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever

Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs

Service tools to ensure long-term success of Chris King hubs. - For use in bearing preload adjustments on all Chris King front and rear hubs

Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime

The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - Magnetized storage case can be used as a handle for extra leverage - 5-year warranty

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

The ultimate trail-side companion. Details - 20 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Chain Tool: 8/9/10/11/12 speed compatible - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Open Wrench: 8mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener - Spoke Wrench: #0, 1, 2 - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 203g

- Professional wrenches fit internal nipples on many deep section aero rims

- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Works with Torx-style nipples found on DT Swiss Tricon Wheels - This professional tool is designed for a precise fit and prevents rounding of nipples - Metal nipple interface contacts torx nipple on all surfaces

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - This professional tool is designed for precise fit and prevents rounding of nipples - Metal nipple interface contacts nipple on all four surfaces - Fits 3.25mm square nipple interface

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

- Gel contains non-Abrasive plastic beads that provide increased surface friction - Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc) - Prevents corrosion/scuffing and quiets creaking noises - Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired - Always follow the manufacturer's torque specifications when clamping carbon parts

- Single 29mm open bore drift for use with 1/2" rods

- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane creek, TH/FSA) - Includes inside gauges for headtubes and cups and outside gauges for bearings

The majority of bicycle maintenance is precision work, and the Dual-Sided Pick takes things to a whole new level. Ideal for removing debris from tires and brake pads, mud and grit from pedals and cleats, grabbing cartridge bearing and suspension seals, or managing any number of other detail work procedures. The overmolded, file-tread grip provides excellent grip and excellent control. The in-line and angled arm shapes are complimentary for intricate work. Available separate, or found in our Team Edition Tool Kit. - Hardened CRV tool steel shafts resist bending under stress - In-line and 90-degree arm shapes combine to simplify countless precision applications - Overmolded ergonomic file tread grip prevents hand fatigue and promotes excellent control - Ideal for removing unwanted debris from bike accessories and components

If there ever was an underrated tool that you probably don’t have in your bike tool kit, it has to be the Valve Core Wrench. Designed to remove or install Presta Valve and Schrader Valve cores, this tiny tool can truly make the process of installing or refilling flat-prevention liquids and gels quick and painless. The versatility of the valve stem tool supports both valve types found on mountain bikes, road bike, commuting and electric bikes – never be stranded on your commute thanks to the Valve Core Wrench. Available separate, or found in our Team Edition and Ride Prep Tool Kits. - Fits Presta Valve and Schrader Valve bike tubes - File tread grip creates a comfortable and ergonomic grip - CRV tool steel metal core makes this a one-time purchase - Aides in the overhaul of suspension forks and rear suspension shocks - Found in our Ride Prep and Team Edition Tool Kits - Limited Lifetime Warranty

The perfect ride-saver that’s so compact you’ll forget you’re carrying…until you need it. This CNC machined, 4-in-1 spoke wrench and valve extender tool can restore a wheel knocked out of true, and change a valve extender during a flat repair. And while you hopefully never need to use it, the Spoke Wrench is one of those tools you ‘ll be glad you had if the situation arises. Available separate, or find it in our Team Edition and Ride Prep Tool Kits. - 4-in-1: 3 spoke nipple tools and 1 valve extender tool - 3.23mm (0.127?) slot fits many DT Swiss, Marwi, Edco and Wheelsmith square nipples - 3.3mm (0.130?) slot fits 15G square nipples - 3.45mm (0.136?) slot fits 14G square nipples - Fits the standard for valve extenders on long-valve presta inner tubes and tubeless presta valve wheels - Hardened CRV tool steel maintains precision edges for a lifetime - Found in our Ride Prep and Team Edition Tool Kits - Limited Lifetime Warranty

Our Steel Core Tire Levers have a hardened CRV tool steel center to prevent flex and breakage. And when getting your tire off is an extra big chore, each lever has a spoke attachment to help you get maximum leverage and secure removal. Add to this an additional polymer tab to properly spread hydraulic disc brake pads and you have a true roadside or trailside 2-in-1 companion. Our Steel Core Tire Levers make inferior tire removal tools a thing of the past. Available separate, or found in our Ride Prep and Team Edition Tool Kits. - Hardened CRV tool steel core prevents flex and breakage - Spoke hook on each lever - High-density polymer protects your rim and promotes smooth tire bead removal - Thin-bladed tip maneuvers under even the tightest tire bead - Wide and reinforced body promotes confidence even with the most challenging tires - Extra-long polymer tab to properly spread hydraulic disc brake pads - Slide-fit system keeps the tire tool pair securely together - Found in our Ride Prep and Team Edition Tool Kits

All Feedback Sports repair stands are designed to be excellent at home and excel in the field. The Flop Stop is a clever service upgrade for the most demanding and home bike mechanics alike. The Flop Stop is an adjustable solution to keep your handlebar position static while you manage detailed bike maintenance like brake bleeds, handlebar wrapping, and full assembly, to name just a few. This handlebar holder also works great when storing road bikes, fitness bikes, mountain bikes, and e-bikes to keep the front wheel straight.